The Rosco iPro makes projecting custom images, fast, easy and cost effective. Designed as an accessory to fit into the iris slot of typical theatrical luminaires, the ImagePro cools and protects a plastic slide -- which has been printed from an ink jet printer! Use either consumer transparency film or for superior results, print onto Rosco iPro Slide Film which has been developed specifically for making iPro Slides.
The iPro requires a line voltage circuit to power its cooling fan. While a dedicated circuit may be used, we recommend the Hybrid Two-Fer allowing your ImagePro and luminaire to share the same circuit. (Dimmers not capable of dimming inductive loads should not control the ImagePro.) An iPro Slide can be made from any image –black and white graphics to full color photos – and will last between 15 and 50 hours before needing to be replaced. Using the iPro, a designer has complete freedom to create exactly the right image for the design with few concerns for budgets or time constraints.
Choose the perfect slide from Rosco’s library of more than 600 standard images or create custom artwork for your project. A custom slide service from Rosco offers same day shipping on a finished, ready to use iPro Slide. Alternately, use the iPro Slide kit and print your own slide. Instructions and guidelines for image sizing and printing can be found on Rosco’s website.